Every day, around the world, between 1,600 and 2 billion cups of coffee are drunk. 65% of these cups are taken in the morning. On average, a person who inhabits the planet consumes 1.3 kilos of coffee in 365 days.
→6 minutes read
COFFEE PROCESSING
The coffee production process is characterized by a set of stages that manage to obtain one of the most consumed beverages today. It is a complex process that requires great dedication and experience to achieve exceptional and unparalleled quality.
The most common production process is usually divided into different stages that begin with obtaining Coffea fruits, which is the plant from which this infusion is obtained. It comes from the well-known Rubiaceae family and can be of different types, although Arabica and Robusta cover 98% of the production. There is a third type, in the coffee agriculture, with a very residual production, known as liberica coffee. Each variety presents different characteristics that make it peculiar and unique. (Please read coffee varietal page for terms and taxonomie).
COFFEE VARIETIES
ABSTRACT
Stages of ripening from the cherry to the roasted bean.
The Cafeto (Coffea), that’s what the coffee bush is called.
The coffee cherry changes from green to red (in general) and ripens slowly as the harvest season approaches.
Collection: The harvests are made when the cherry is ripe.
Processing: It involves removing the pulp and drying the seed through selection (floats) and fermentation. There are three main ways of processing coffee:
Washed (also known as wet processing)
The natural method (also known as dry processing)
The honey process
Dry threshing – The last step in processing is removing a protective layer called “parchment” that sits outside the grain. It is a thin but hard shell.
Green bean: This is the bean ready for export. The humidity level should be around 10-12%. It is stored in such a way as to have adequate ventilation to avoid fungus or damage due to inappropriate environments.
Roasted: The green bean is purchased by the coffee roaster, where it can be stored for up to a year. The roaster will normally be located in the country of consumption
Washed
Washed process
(also known as wet process)
Fruit removal: Usually pulped (without skin) or mucilled (without skin and pulp) within 24 hours of harvest
Fermentation: pulped coffees are usually kept in “fermentation tanks”. » for 12 to 72 hours; demucilated coffees are not commonly kept in tanks, but instead are moved to drying surfaces or equipment. Fermentation can occur from the time of harvest until the seeds reach an inhospitable moisture content for them (11% moisture)
Drying time: on average, 18 to 36 hours mechanically; 7 to 15 days on patios, raised beds, or parabolic dryers
Profile: Clean, articulate flavors; caramelized or sugary sweetness; a wide spectrum of fruit acidity depending on other factors; capable of bright and crisp notes
Honey
Honey process
Fruit removal: Fruit skin is removed within 24 hours of harvest; all or part of the mucilage is allowed to dry on the seeds
Fermentation: Occurs throughout the drying process (until the seeds reach a moisture content of 11%)
Drying time: 18–25 days on average
Profile: May express some flavors fruity/puppy/jammy or stewed fruit-like characteristics; sweetness of caramel or burnt sugar; Walnut
Natural
Natural process
(also known as sun drying or dry processing)
Fruit removal: After drying
Fermentation: Occurs within the fruit mucilage surrounding the seed and under the pulp, will take place as long as fuel is available for microorganisms (eg sugar, moisture, acids, etc.); seeds normally become inhospitable to microorganisms when they reach 11% moisture
Drying time: up to 30 days on average, weather permitting
Profile: Noticeably fruity or “puppy” flavors, often described as “honeydew” or ” vinous’; can also have strong nutty and/or chocolate characteristics, and generally has a heavier or syrupy body
SEED TO CUP IN DETAIL
1.Planting, A coffee bean is actually a seed. …2.Harvesting the Cherries. …3. Processing the Cherries. …4. Drying the Beans. ..5. Milling the Beans. …6. Exporting the Beans. …7. Tasting the Coffee. …8. Roasting the Coffee…9. Grinding Coffee…10. Brewing Coffee…
1. Planting
A coffee bean is actually a seed. When dried, roasted and ground, it’s used to brew coffee. If the seed isn’t processed, it can be planted and grow into a coffee tree.
Coffee seeds are generally planted in large beds in shaded nurseries. The seedlings will be watered frequently and shaded from bright sunlight until they are hearty enough to be permanently planted. Planting often takes place during the wet season, so that the soil remains moist while the roots become firmly established.
2. Harvesting the Cherries
Depending on the variety, it will take approximately 3 to 4 years for the newly planted coffee trees to bear fruit. The fruit, called the coffee cherry, turns a bright, deep red when it is ripe and ready to be harvested.
There is typically one major harvest a year. In countries like Colombia, where there are two flowerings annually, there is a main and secondary crop.
In most countries, the crop is picked by hand in a labor-intensive and difficult process, though in places like Brazil where the landscape is relatively flat and the coffee fields immense, the process has been mechanized. Whether by hand or by machine, all coffee is harvested in one of two ways:
Strip Picked: All of the cherries are stripped off of the branch at one time, either by machine or by hand.
Selectively Picked: Only the ripe cherries are harvested, and they are picked individually by hand. Pickers rotate among the trees every eight to 10 days, choosing only the cherries which are at the peak of ripeness. Because this kind of harvest is labor intensive and more costly, it is used primarily to harvest the finer Arabica beans.
A good picker averages approximately 100 to 200 pounds of coffee cherries a day, which will produce 20 to 40 pounds of coffee beans. Each worker’s daily haul is carefully weighed, and each picker is paid on the merit of his or her work. The day’s harvest is then transported to the processing plant.
3. Processing the Cherries
Once the coffee has been picked, processing must begin as quickly as possible to prevent fruit spoilage. Depending on location and local resources, coffee is processed in one of two ways:
The Dry Method is the age-old method of processing coffee, and still used in many countries where water resources are limited. The freshly picked cherries are simply spread out on huge surfaces to dry in the sun. In order to prevent the cherries from spoiling, they are raked and turned throughout the day, then covered at night or during rain to prevent them from getting wet. Depending on the weather, this process might continue for several weeks for each batch of coffee until the moisture content of the cherries drops to 11%.
The Wet Method removes the pulp from the coffee cherry after harvesting so the bean is dried with only the parchment skin left on. First, the freshly harvested cherries are passed through a pulping machine to separate the skin and pulp from the bean.
Then the beans are separated by weight as they pass through water channels. The lighter beans float to the top, while the heavier ripe beans sink to the bottom. They are passed through a series of rotating drums which separate them by size.
After separation, the beans are transported to large, water-filled fermentation tanks. Depending on a combination of factors — such as the condition of the beans, the climate and the altitude — they will remain in these tanks for anywhere from 12 to 48 hours to remove the slick layer of mucilage (called the parenchyma) that is still attached to the parchment. While resting in the tanks, naturally occurring enzymes will cause this layer to dissolve.
When fermentation is complete, the beans feel rough to the touch. The beans are rinsed by going through additional water channels, and are ready for drying.
4. Drying the Beans
If the beans have been processed by the wet method, the pulped and fermented beans must now be dried to approximately 11% moisture to properly prepare them for storage.
These beans, still inside the parchment envelope (the endocarp), can be sun-dried by spreading them on drying tables or floors, where they are turned regularly, or they can be machine-dried in large tumblers. The dried beans are known as parchment coffee, and are warehoused in jute or sisal bags until they are readied for export.
5. Threshing the Beans
Before being exported, parchment coffee is processed in the following manner:
Hulling machinery removes the parchment layer (endocarp) from wet processed coffee. Hulling dry processed coffee refers to removing the entire dried husk — the exocarp, mesocarp and endocarp — of the dried cherries.
Polishing is an optional process where any silver skin that remains on the beans after hulling is removed by machine. While polished beans are considered superior to unpolished ones, in reality, there is little difference between the two.
Grading and Sorting is done by size and weight, and beans are also reviewed for color flaws or other imperfections.
Beans are sized by being passed through a series of screens. They are also sorted pneumatically by using an air jet to separate heavy from light beans.
Typically, the bean size is represented on a scale of 10 to 20. The number represents the size of a round holes diameter in terms of 1/64’s of an inch. A number 10 bean would be the approximate size of a hole in a diameter of 10/64 of an inch, and a number 15 bean, 15/64 of an inch.
Finally, defective beans are removed either by hand or by machinery. Beans that are unsatisfactory due to deficiencies (unacceptable size or color, over-fermented beans, insect-damaged, unhulled) are removed. In many countries, this process is done both by machine and by hand, ensuring that only the finest quality coffee beans are exported.
6. Exporting the Beans
The milled beans, now referred to as green coffee, are loaded onto ships in either jute or sisal bags loaded in shipping containers, or bulk-shipped inside plastic-lined containers.
World coffee production for 2015/16 is forecast to be 152.7 million 60-kg bags, per data from the USDA Foreign Agriculture Service.
7. Tasting the Coffee
Coffee is repeatedly tested for quality and taste. This process is referred to as cupping and usually takes place in a room specifically designed to facilitate the process.
- First, the taster — usually called the cupper — evaluates the beans for their overall visual quality. The beans are then roasted in a small laboratory roaster, immediately ground and infused in boiling water with carefully-controlled temperature. The cupper noses the brew to experience its aroma, an essential step in judging the coffee’s quality.
- After letting the coffee rest for several minutes, the cupper breaks the crust by pushing aside the grounds at the top of the cup. Again, the coffee is nosed before the tasting begins.
- To taste the coffee, the cupper slurps a spoonful with a quick inhalation. The objective is to spray the coffee evenly over the cupper’s taste buds, and then weigh it on the tongue before spitting it out.
Samples from a variety of batches and different beans are tasted daily. Coffees are not only analyzed to determine their characteristics and flaws, but also for the purpose of blending different beans or creating the proper roast. An expert cupper can taste hundreds of samples of coffee a day and still taste the subtle differences between them.
8. Roasting the Coffee
Roasting transforms green coffee into the aromatic brown beans that we purchase in our favorite stores or cafés. Most roasting machines maintain a temperature of about 350 degrees Fahrenheit. The beans are kept moving throughout the entire process to keep them from burning.
When they reach an internal temperature of about 300 degrees Fahrenheit, they begin to turn brown and the caffeol, a fragrant oil locked inside the beans, begins to emerge. This process called pyrolysis is at the heart of roasting — it produces the flavor and aroma of the coffee we drink.
After roasting, the beans are immediately cooled either by air or water. Roasting is generally performed in the importing countries because freshly roasted beans must reach the consumer as quickly as possible.
9. Grinding Coffee
The objective of a proper grind is to get the most flavor in a cup of coffee. How coarse or fine the coffee is ground depends on the brewing method.
The length of time the grounds will be in contact with water determines the ideal grade of grind Generally, the finer the grind, the more quickly the coffee should be prepared. That’s why coffee ground for an espresso machine is much finer than coffee brewed in a drip system.
Espresso machines use 132 pounds per square inch of pressure to extract coffee.
We recommend taking a moment to examine the beans and smell their aroma — in fact, the scent of coffee alone has been shown to have energizing effects on the brain.
10. Brewing Coffee
To master how to brew coffee, use our guide for tips and methods on how to make the perfect cup for any preference. Enjoy!
RURAL TRANSITION NOW
Join us and help to combat climate, food and social vulnerability! Tierras de Montaña a is a project that combines
HUILA COFFEE, EXPORT MANAGEMENT
EXPORT PROPOSAL #0531 Single Origin Coffee, Huila BUENAVISTA FARM – JOSE JOAQUIN ORDOÑEZ The Coffee T+ank Project 01 Single Origin
COFFEE FROM HUILA, LAS MORAS, EXPORT MANAGEMENT
EXPORT PROPOSAL #1206 Single Origin Coffee, Huila LAS GARMAS FARM – Fernando Rosero Fernando Rosero Le projet coffee t+ank 01
THE INSETTING
agroforestry insetting for coffee WHAT IS INSETTING AND HOW DOES IT WORK? INSETTING — Enseignement provenant de IPO (https://www.insettingplatform.com/an-insetting-story/) The
CARBON CAPTURE IN FOREST BIOMASS
The Coffee T+ank Project A forest is more than a trees collection… The increase in the concentration of carbon dioxide
SOIL EROSION
The Coffee T+ank Project Soil Erosion: Types, How to Avoid and Control It… Erosion degrades soil quality and is one